indesit dif 16 3 lights flashing

Home Forums Public Support Forums Help And Support Dishwasher Help Forum indesit dif 16 3 lights flashing

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #51325
    magic5
    Participant

    the machine goes to start but seems to just drain and then 1st 3 lights just flash and it just carrys on draining . cant find my instruction manual so any ideas greatly appreciated 😥 ❓

    #307597
    iadom
    Moderator

    Re: indesit dif 16 3 lights flashing

    Module has detected no turbine rotation. check turbine
    and wiring.

    Be sure to remove the mains plug if you intend to open it up.

    #307598
    tetleys26
    Participant

    Re: indesit dif 16 3 lights flashing

    We have the exact same problem with our indesit DIF16. Could you please explain how we can resolve this problem?
    Regards

    #307599
    iadom
    Moderator

    Re: indesit dif 16 3 lights flashing

    iadom wrote:Module has detected no turbine rotation. check turbine
    and wiring.

    Be sure to remove the mains plug if you intend to open it up.

    Err, check/change turbine and fill chamber assembly.

    #307600
    Duncanw
    Participant

    Re: indesit dif 16 3 lights flashing

    Hi Iadom. I have just had this problem which shows 3 lights flashing. The machine does not fill but hums instead. Then the lights flash. Does this sound the same as he last problem you mentioned checking the turbine? Where is this on the machine? I’m based in the same town (Rochdale/Oldham boarder)as you could you recommend anyone to repair if necessary?

    #307601
    iadom
    Moderator

    Re: indesit dif 16 3 lights flashing

    If you get a humming noise then the first thing to check is that the inlet water tap is turned on. Could it have frozen over the weekend, it did go very cold on Saturday night?

    The water turbine/air break is behind the left hand ( from front ) side panel. A squarish, translucent plastic doofer. Fairly easy to change if needed but check the water inlet first of all.

    #307602
    Duncanw
    Participant

    Re: indesit dif 16 3 lights flashing

    Hi Iadom,
    i have the side panel off – to be honest apat from it being present i’m not sure what i’m checking for! the water inlet is working, in fact we got a partial cycle earlier – the water fill started but then it all stopped soon after. again 3 flashing lights.
    What should i do to check the turbine/air break – treat me like a complete fool and describe it like you would to a child!!

    #307603
    Duncanw
    Participant

    Re: indesit dif 16 3 lights flashing

    Right more detail – with the side off i can see the fresh water fill start the a few noises for about 20 secs then i hear a short drain (hear through the sink drain where the outlet goes into) then about 5 secs later the 3 lighs start flashing along with the green power light and i can hear a humming noise which when you open the front door sounds like a suction noise.

    #307604
    iadom
    Moderator

    Re: indesit dif 16 3 lights flashing

    You can’t really check the turbine. It’s part of the squarish plastic chamber on the side. Not expensive and simple to change.

    #307605
    Duncanw
    Participant

    Re: indesit dif 16 3 lights flashing

    many thanks for the advice – would you know of anywhere locally to get this part bearing in mind i’m local to you i think

    #307606
    iadom
    Moderator

    Re: indesit dif 16 3 lights flashing

    Part number is C00256546. There is nowhere local you can go and buy one of these. A quick Google for that part number will get you plenty of results but TBH buying it direct from Indesit is probably cheaper than a lot of the online spares places. List price is around £17.50 inc vat.

    Or better still Right here 😉

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.