- This topic has 4 replies, 2 voices, and was last updated 16 years, 3 months ago by
.
-
Posts
-
Can anyone give me part numbers and prices on a wash pump & sump gasket for the above machine please?
Also can the sump gasket be fitted from inside the tank without dismantling the whole machine?
Re: DWI612C Wash pump & sump gasket.
695210296 is the pump
754131082 is the seal
must admit to never having had to change the seal but if you are doing a pump anyway it cannot be that much more work. Its usualy just loose sump moulding screws if it leaks there.Re: DWI612C Wash pump & sump gasket.
Water was pouring through the sump seal, so I tightened the screws which appeared to stop the leak.
I noticed signs of a leak beneath the wash pump but when tested it didn’t appear to be a problem so not sure if this is caused by water left in the tray from the gasket or the pump. I couldn’t get the machine out without a lot of work so decided to see if tightening the sump screws would do the trick.
Having just had another call it looks as if the machine could still be leaking so I will have to go back and investigate further.
Thanks for the part numbers, at least I can go back remove the machine and quote for whatever’s needed.
Re: DWI612C Wash pump & sump gasket.
tightening up those screws normaly does the trick, god knows why they come loose, I used to blame customers for undoing them when trying to clean or whatever but I have had too many for it to be that reason, although one did own up to it! I think the seal must contract leaving it loose, as I said, never had to change one. normal leak point is the 2 o rings where the air break joins the water softner in the rh side panel (as you view it from the front).
- You must be logged in to reply to this topic.