- This topic has 3 replies, 3 voices, and was last updated 16 years, 3 months ago by
.
-
Posts
-
Our whirlpool g2pdwi tripped the fuse in our main fuse box (RCD) and does so instantly every time I switch it on. It makes quiet clicking noise first.
I tried the machine in another socket. It worked for a minute, then the same thing happened again.
Any advice would be hugely appreciated.
Cheers,
Nik
Re: Whirlpool dishwasher tripping fuse box
Could be anything, unforunately. My suspicion would be that the tray under the machine is full of water and various components will be sitting in it. Clicking noises are usually associated with the pcb relays, so possible that there is a corruption issue going on.
You’ll have to get in there and find out….
Power off if you intend to tackle this yourself.
Penguin45.
Re: Whirlpool dishwasher tripping fuse box
Penguin45 wrote:Could be anything, unforunately. My suspicion would be that the tray under the machine is full of water and various components will be sitting in it. Clicking noises are usually associated with the pcb relays, so possible that there is a corruption issue going on.
You’ll have to get in there and find out….
Power off if you intend to tackle this yourself.
Penguin45.
Cheers Penguin45. I’ll take a butcher’s.
- You must be logged in to reply to this topic.