module for vtd60g

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › module for vtd60g

Viewing 15 posts - 1 through 15 (of 23 total)
1 2
  • Author
    Posts
  • January 13, 2010 at 9:00 am #51582
    bmrenr
    Participant

    Hi guys I am looking for a module for the above dryer could someone give me partfinders contact info please.

    Tom

    January 13, 2010 at 10:57 am #308603
    iadom
    Moderator

    Re: module for vtd60g

    The part number is Here in your previous thread. 😉

    Partfinder is a parts identification DVD, as far as I know you cannot contact it directly. 😀

    Jim.

    February 2, 2010 at 3:40 pm #308604
    bmrenr
    Participant

    Re: module for vtd60g

    Hi I ended up getting both pcbs and now im getting f12 error code on the uk whitegoods error code book it says this is no communicartion between the boards for wash m/c is it the same for dryer. I have squeezed the connectors and even put a new set on . Is there some procedure I should follow when fitting new display and module?

    Tom

    February 2, 2010 at 4:19 pm #308605
    iadom
    Moderator

    Re: module for vtd60g

    F12 is a comms error.

    Check connector J9 on module;
    • Check wiring between module connector J9 and display;
    • Check display connector;


    Jim.

    February 2, 2010 at 6:49 pm #308606
    bmrenr
    Participant

    Re: module for vtd60g

    I have done all of these checks. All seem ok. any other ideas.

    tom

    February 2, 2010 at 7:18 pm #308607
    iadom
    Moderator

    Re: module for vtd60g

    Not come across this problem myself, thats all the service manual has to offer, sorry. :con:

    Jim.

    February 2, 2010 at 8:48 pm #308608
    bmrenr
    Participant

    Re: module for vtd60g

    ok jim ,thanks for your help. well appreciated

    tom

    February 2, 2010 at 8:50 pm #308609
    helo_75
    Participant

    please tell me u programmed it?

    February 2, 2010 at 10:22 pm #308610
    iadom
    Moderator

    Re: module for vtd60g

    😳 DOH, I wasn’t looking for a base mounted PCB and in my haste missed the smartcard/card reader guff on Partfinder.

    Its my age you know. 😥

    Might be worth sticking the old console PCB back in to see if it was just the display that was faulty.

    February 2, 2010 at 10:26 pm #308611
    eastlmark
    Moderator

    Re: module for vtd60g

    really looking forward to seeing one of these, how many eeprom/module combinations are there……..

    February 2, 2010 at 10:36 pm #308612
    iadom
    Moderator

    Re: module for vtd60g

    Confused now, bmrenr, did you fit a new facia PCB or the main one in the base?

    The one in the base has at least five different eeproms or five smartcards and three different modules. 😥

    February 2, 2010 at 10:49 pm #308613
    helo_75
    Participant

    oh the joy….

    send it to emw, its the only hope

    February 3, 2010 at 1:40 am #308614
    bmrenr
    Participant

    Re: module for vtd60g

    Hi I have fitted both display pcb and base mounted module.I ordered the base mounted module first and fitted it and it did not work so I ordered the display pcb.This is what happens I plug in the m/c and the display flickers for a second and just dies but when I keep the on button pressed f12 appears on the display and the clean filter neon lights up.I have put back on the old base mounted module but the same thing happens . I have not programmed the new module but when the old module is giving the same code is there any need to?

    Tom.

    February 3, 2010 at 10:14 am #308615
    iadom
    Moderator

    Re: module for vtd60g

    All new modules need to be programmed with smart card and reader.

    As there are three different base PCB’s how did you identify the correct one?

    February 3, 2010 at 11:34 am #308616
    bmrenr
    Participant

    Re: module for vtd60g

    I just rang my supplier and gave him the model and s/n of the m/c. I thought the modules came pre programmed. I have heard of these smart cards and readers are they expensive and do you have to get a new one for every module?

    Cheers Tom.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 23 total)
1 2
  • You must be logged in to reply to this topic.