Belling d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Belling d/w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 14, 2010 at 3:06 pm #51628
    rickard
    Participant

    I have had a look at a IDW602 belling dishwasher with a mechanical timer. When you start the program it fills with water and heats but then will not progress any further the timer does not move any more, if i turn it manually i cant get the wash pump to work either. i suspect timer fault but would be gratefull for any information on this appliance.
    Many Thanks
    Andy

    January 14, 2010 at 3:36 pm #308784
    cab
    Participant

    Re: Belling d/w

    Is it a chinese made one? the mechanical timers are suspect on those.

    January 14, 2010 at 3:57 pm #308785
    rickard
    Participant

    Re: Belling d/w

    The part number i have from masterpart shows it as either a merloni or another picture shows it as a brandt
    Andy

    January 14, 2010 at 4:27 pm #308786
    eastlmark
    Moderator

    Re: Belling d/w

    I think thats a Brandt one (2 screws on the outside of lower door panel near the bottom once the outer door panel is removed?) Suffers badly from door loom breakages and did used to repair the odd one for MFI with a new loom, pretty old now and not worth the bother IMO.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.