hotpoint dryer dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint dryer dead

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 25, 2010 at 5:35 pm #51963
    abbots
    Participant

    hi,
    CTD40

    completeley dead, no lights or fault codes.
    i checked all obvious things, door interlock, supply, wiring loom.
    power getting to the lower module but no output.
    does any one repair the power boards on these?
    I cant see anything on the EMW site about them.
    any info. would be appreciated.
    thanks
    john

    January 25, 2010 at 5:39 pm #310129
    franz
    Participant

    Re: hotpoint dryer dead

    have you checked the stats – some of these machines are wired so that if the stats go o/c – then eveything else goes dead.
    Franz

    January 25, 2010 at 5:57 pm #310130
    abbots
    Participant

    Re: hotpoint dryer dead

    un fortunateley yes,
    new stats tried

    January 25, 2010 at 6:50 pm #310131
    helo_75
    Participant

    emw do now repair he boards, tony told me’

    good point about the stats though, they take out the neutral rather than the live, so it fools you if you live test

    last on i had, incidentally that was totally dead was the top board, not the bottom

    January 25, 2010 at 7:35 pm #310132
    abbots
    Participant

    Re: hotpoint dryer dead

    cheers for that,
    i’ll give EMW a ring tommorrow.
    jk

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.