Hotpoint dryer CTD80 wiring diagram

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint dryer CTD80 wiring diagram

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • January 27, 2010 at 6:36 pm #52022
    Bernie
    Participant

    Would anybody have a wiring diagram for a Hotpoint dryer CTD80 as I have no heat, thought it was the stat kit this one has three stats and the middle one is open circuit, the one in the new kit is also open circuit so not the kit heater ok.
    Thanks Bernie

    January 27, 2010 at 6:43 pm #310338
    RickT
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    Possible heater relay or dry joint on module down on the right hand side.

    January 27, 2010 at 7:20 pm #310339
    Bernie
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    Thanks for that RickT

    January 27, 2010 at 9:28 pm #310340
    helo_75
    Participant

    nah, it would flash the dreaded f8

    personally, id be making sure the pump was working, and the float switch wasnt activated

    January 27, 2010 at 9:57 pm #310341
    A1_Domestics
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    I’ve forwarded a little something for you …just in case.

    January 27, 2010 at 10:08 pm #310342
    Bernie
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    Thanks to both of you and a second thanks to A1 for the email

    Very much appreciated

    Bernie

    January 29, 2010 at 2:40 pm #310343
    Bernie
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    I haven’t been back to this yet going on Tuesday, I have just got a new thermostat kit (10703608) which has one-shot cut out, a cycling thermostat and an NTC, should I not get some sort of reading across this as both the one in the machine and the new one are open circuit

    Looking at the wiring diagram it shows the NTC as closed circuit.

    Bernie

    January 29, 2010 at 3:22 pm #310344
    iadom
    Moderator

    Re: Hotpoint dryer CTD80 wiring diagram

    Both NTC’s will be OK, check it for resistance not continuity. 😉

    It will vary with temperature but should be at least 1000Ω

    Jim.

    January 29, 2010 at 5:38 pm #310345
    Bernie
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    Thanks for that Jim

    November 1, 2010 at 9:08 pm #310346
    Hollytree_Technical
    Participant

    Re: Hotpoint dryer CTD80 wiring diagram

    Have just had a call about one of these with an “F10” error and would like to go armed.

    Can some one send me the info please and can any one tell me what the difference is between the 2 thermostat kits (what is the difference between the black and white thermistors and are they interchangeable)?

    Thank you

    Jem

    November 1, 2010 at 9:19 pm #310347
    iadom
    Moderator

    Re: Hotpoint dryer CTD80 wiring diagram

    F10 open circuit in heater common, possibly one shot failed due to bunged up condensor.

    Err, one is black (TOD). C00208299, the other is white(ELTH). C00208298, they are not interchangable, both come as a kit.

    Jim.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.