indesit wixl163uk

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › indesit wixl163uk

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 2, 2010 at 7:23 pm #52166
    randomrob
    Participant

    Hi hust wondered what you thought about this fault with the indesit wixl163uk
    s/n 710137297

    The machine is not spinning properly, it agitates ok but never gets up into the full spin. I have checked the brushes and cleared the pressure system of blockages. It worked for 1 cycle then went back to not working. I think it is the pressure switch getting stuck but just wanted a second opinion. It also brings up a fault code on a spin programme of lights 3 and 4 (left to right) which i thought was a thermister prob?

    any advice will be gratefully received.
    thanks
    rob

    February 2, 2010 at 7:44 pm #310808
    helo_75
    Participant

    light 3 and 4 is f10

    which indeed is ‘not sensing pressure switch’

    now, that could be a faulty switch.or a faulty pcb

    i know what my moneys on, but id first check the pcb connections where the pressure switch connects

    power off off course

    February 2, 2010 at 7:50 pm #310809
    randomrob
    Participant

    Re: indesit wixl163uk

    thanks for the quick reply, i think the switch is about 12 quid anyway so will check the connections and order a switch and see what happens
    rob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.