- This topic has 1 reply, 2 voices, and was last updated 16 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Can anybody offer advice….the above machine has developed a noise during during any “spin”cycle. I have removed the 3-legged bearing and checked the bearings for wear….there is some play (no water ingress). Iintend toreplace them + the seal. However Iam not convinced the wear is sufficient to cause the problem………if I press down hard and rotate the inner drum it “fouls” the outer drum. Could the inner drum started to come adrift from its “drive-shaft”.
Any help would be appreciated.
Albie
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.