hi guys anyone had this fault the compressor fan does not run and the fridge fan doesnt normally fan at back comes on when the motor runs the fridge working ok already had the mod kit but the freezer only gets down to -10 not the module as i had a spare diagos on pcb comes up with no errors very strange thermal fusses checked will just suddenly stop and then defrosts
Anyone had this fault? The compressor fan does not run and the fridge fan doesn’t. Normally, fan at back comes on when the motor runs. The fridge is working ok. Already had the mod kit but the freezer only gets down to -10. Not the module, as i had a spare. Diagosis on pcb comes up with no errors – very strange. Thermal fuses checked. It will just suddenly stop and then defrosts.”
And so do we all …. which is why when I look for help , I try to give as much information and be as clear as possible . Surely it is easier to help those helping you than using playground slang and no punctuation ?
must admit i agrre with chezza on this… orig post very hard to undertand?
what do you mean with mod kit ??? …
agree with 600a defrost heater , also check drain hole heater in fridge compartment , famous for the little wires that go down drain hole corroding..on this older model