(Bypass)bosch fridge freezer thermistor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › (Bypass)bosch fridge freezer thermistor

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 16, 2010 at 10:03 pm #52562
    chippo
    Participant

    does anyone know what wire colours to join together to bypass fridge thermistor.I bought the thermistor kit years ago which consisted of a butt connector and instructions on which way to rewire them but cannot find these instructions.

    February 16, 2010 at 10:08 pm #312283
    superfix
    Participant

    Re: (Bypass)bosch fridge freezer thermistor

    Buy another…. it comes with the destructions.

    What’s the E-NR…. as the mod is only specific to one model.

    February 16, 2010 at 10:55 pm #312284
    chippo
    Participant

    Re: (Bypass)bosch fridge freezer thermistor

    £32 back then its an expensive butt connector. Not sure model until i go to morrow.

    February 17, 2010 at 12:20 am #312285
    Penguin45
    Participant

    Re: (Bypass)bosch fridge freezer thermistor

    I think that this is what you want:

    sparkey wrote:Machineman,

    First identify the sensor leads on the module, usually either a three pin or a four pin connector.

    If four pin, locate the twin cable connected to terminal 1 & 3 cut off sensor cable about 2in from module and join together effectivly shorting out terminals 1 & 3 on the module connector.

    If three pin locate sensor lead connected to terminals 1 & 2 and do as above. TAKE CARE to not disturb the other sensor lead which is also connected to terminal 1.

    Terminal numbers are moulded into the white moulding of the connector plug.

    Regards
    Sparkey

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.