- This topic has 3 replies, 3 voices, and was last updated 16 years, 1 month ago by
.
-
Posts
-
Hi,
The door on my oven has never really closed flush to the surround. I recently had an inspired couple of days and replaced the faulty grill element, oven seal and oven hinges(to see if it made a difference) The door is still not flush to the surround. It seals ok ish, but doesn’t look quite right! I appreciate it’s a pretty cheap appliance and you get what you pay for, but is there an easy way to adjust the door gap? The door runs out from flush at the bottom to about 10mm at the top.
Re: DeLonghi DFS901SS
Hi
Is the door sealing?? If it is there is not much that can be done as there is no adjustments on these doors
When shutting the door does it touch the seal at the top then open up a gap between door and seal?? If it is doing this then remove the door and check the rollers within the oven door hinge receiver. This roller should not be able to move up and down. They have a habit of wearing and not holding the door firmly closed. rplace these and door will close firmly.
Geoff
- You must be logged in to reply to this topic.