Indesit Dishwasher IDL500UK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit Dishwasher IDL500UK

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 18, 2010 at 8:57 pm #52622
    Bernie
    Participant

    Indesit Dishwasher IDL500UK Fills for about 30/60 seconds then drain pump cuts in machine stops no flashing LEDs will not do anything unless you unplug for five minutes or so then it will do the same again.

    Have checked pressure switch ok and hose to pressure switch not blocked.

    Also had PCB out and looked for dry joints etc all ok there.

    Any suggestions please

    Bernie

    February 18, 2010 at 9:40 pm #312504
    aqualectric
    Participant

    Re: Indesit Dishwasher IDL500UK

    It can’t detect the flowmeter – the reed switch is probably goosed. New flowmeter about a tenner from Connect; easy fix. 😉

    HTH,

    Steve.

    February 19, 2010 at 11:21 am #312505
    Bernie
    Participant

    Re: Indesit Dishwasher IDL500UK

    Thanks for that THT

    I have ordered one, as you say about a tenner from Connect

    Bernie

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.