Hotpoint CTD80P – with spare part C00193806

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint CTD80P – with spare part C00193806

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • February 22, 2010 at 9:50 am #52689
    davidrmoore
    Participant

    Hopefully someone can help. My CTD80p display started flickering, so I replaced it with a new one – Part no. C00193806. I can choose all the different programmes, but as soon as I press “Start” the tumbledryer beeps 4 times and will not start. The water has been emptied and the filter has been cleaned. There are no fault codes displayed. Any ideas what the problem could be?

    February 22, 2010 at 9:55 am #312759
    iadom
    Moderator

    Re: Hotpoint CTD80P – with spare part C00193806

    Door switch.

    February 22, 2010 at 8:10 pm #312760
    helo_75
    Participant

    or the door pins fallen out

    February 22, 2010 at 9:48 pm #312761
    davidrmoore
    Participant

    Re: Hotpoint CTD80P – with spare part C00193806

    Thanks for your help. I actually had plugged in a cable to the top of the drum incorrectly – i’ve plugged this in now and its working. although very noisy and grinding. Thanks for taking the time to reply

    February 23, 2010 at 12:46 am #312762
    washermanuk
    Participant

    Re: Hotpoint CTD80P – with spare part C00193806

    ANOTHER REAR BEARING GONE? :rolls:

    February 23, 2010 at 10:43 am #312763
    iadom
    Moderator

    Re: Hotpoint CTD80P – with spare part C00193806

    Or one of the plastic fans loose, hopefully the one at the rear. 😉

    February 23, 2010 at 9:07 pm #312764
    davidrmoore
    Participant

    Re: Hotpoint CTD80P – with spare part C00193806

    Thanks for all your help. It was the plastic fan on the bottom left as you stand facing the back of the tumble dryer. I think I need a spare one -C00226347? the old one just falls off without undoing the metal clip. Do you think the spare one will sort it out?

    February 23, 2010 at 10:24 pm #312765
    helo_75
    Participant

    wrap inulation tape around motor shaft, then tap fan back on

    job done, and will never need changing again

    February 24, 2010 at 9:39 am #312766
    davidrmoore
    Participant

    Re: Hotpoint CTD80P – with spare part C00193806

    Great, thanks for the tip. I’ll try it tonight and let you know how it goes.

    February 25, 2010 at 8:50 am #312767
    davidrmoore
    Participant

    Re: Hotpoint CTD80P – with spare part C00193806

    The tumble dryer is all sorted now. Many thanks for your help.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.