Miele dishwasher G977 Plus inlet/drain flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele dishwasher G977 Plus inlet/drain flashing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 25, 2010 at 4:04 pm #52793
    Islander
    Participant

    Hi,
    Machine starts to fill then stops after few seconds, then inlet/drain light starts to flash. It keeps filling like this but doesn’t start to wash. There is a flow meter on the side chamber which appears to be turning ok. I have also checked the inlet filters and water pressure seems to be ok. Customer has recently had some plumbing work done so the stop cock was turned off could this have affected the machine?

    February 25, 2010 at 9:20 pm #313141
    Galway
    Participant

    Re: Miele dishwasher G977 Plus inlet/drain flashing

    not sure if this will help but had a similar problem with a different model and it turned out to be the water level indicator /which is a kind of pressure switch.but it could also be something in the impellor of the main wash motor.

    February 27, 2010 at 11:14 am #313142
    Seamy
    Participant

    Re: Miele dishwasher G977 Plus inlet/drain flashing

    If water supply has been ajusted its maybe that its not filling to required level in time. Common problems with them are faulty flowmeters or connections from flow meter to board.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.