hotpoint drum spider wf240

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › hotpoint drum spider wf240

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 1, 2010 at 6:47 am #52870
    agro
    Participant

    hi guys im having trouble with a drum spider part number every time i order from connect wrong one. The one im getting through has a bigger shaft part number im using is c00117329 .Ihave heard there are two different types any ideas

    March 1, 2010 at 9:18 am #313473
    Phidom
    Participant

    Re: hotpoint drum spider wf240

    I thought there was only the 35mm one available. If the spider needs to be changed you have to also renew the rear half tub for the 35mm shaft one. Whats wrong with the spider anyway?

    March 1, 2010 at 11:00 am #313474
    agro
    Participant

    Hi its coroaded around the shafdt the tub ok and ive got the correct bearings to fit two types of bearings

    March 1, 2010 at 11:24 am #313475
    iadom
    Moderator

    Re: hotpoint drum spider wf240

    The 30mm shaft has never been available as a separate part, rear half & 35mm spider only option as Phidom says.

    The part number you have is the 35mm spider.

    March 1, 2010 at 11:46 am #313476
    Phidom
    Participant

    Re: hotpoint drum spider wf240

    Just re-use the spider unless the bearings are loose on the shaft. The seal does not have to seal against the shaft surface. one part of the seal turns with the shaft, the other stays still in the tub.

    March 1, 2010 at 3:47 pm #313477
    agro
    Participant

    Blast high cost if i have to replace the tub then .Looks like ive been caught out

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.