CDA CW448 – Leakage & Error Codes

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › CDA CW448 – Leakage & Error Codes

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 1, 2010 at 8:56 pm #52898
    netghost
    Participant

    Hi,

    Our machine is giving us grief, yet again!!! We put it on the usual cycle to wash the tea dishes. After a while, the machine gave 5 beeps, I went to investigate and there was some water all over the kitchen floor, from somewhere underneath the dishwasher.

    I have tried resetting the machine numerous times but it doesn’t seem to work. I have turned the power off, let it run for an hour and a half and still it seems to be stuck on the drain cycle.

    If I poor water in and put the waste pipe in a bucket, the machine pumps the water out. Even when it’s dry, it still keeps on pumping!!

    Anyone any ideas what’s up with it and a possible fix before we get the engineers out.

    Regards, NetGhost

    March 2, 2010 at 12:15 am #313558
    Penguin45
    Participant

    Re: CDA CW448 – Leakage & Error Codes

    Last time, it was flooded in the tray underneath – tipping it re-set the float switch and allowed it to work. You really need to get the covers off and find the leak.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.