CDA CW448 – Leakage & Error Codes

[netghost]

Hi,

Our machine is giving us grief, yet again!!! We put it on the usual cycle to wash the tea dishes. After a while, the machine gave 5 beeps, I went to investigate and there was some water all over the kitchen floor, from somewhere underneath the dishwasher.

I have tried resetting the machine numerous times but it doesn’t seem to work. I have turned the power off, let it run for an hour and a half and still it seems to be stuck on the drain cycle.

If I poor water in and put the waste pipe in a bucket, the machine pumps the water out. Even when it’s dry, it still keeps on pumping!!

Anyone any ideas what’s up with it and a possible fix before we get the engineers out.

Regards, NetGhost

[Penguin45]

Re: CDA CW448 – Leakage & Error Codes

Last time, it was flooded in the tray underneath – tipping it re-set the float switch and allowed it to work. You really need to get the covers off and find the leak.

Penguin45.

[Author]

Posts