New Hotpoint WT741 Error F-10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › New Hotpoint WT741 Error F-10

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 6, 2010 at 1:37 pm #53030
    whiskeyjack6058
    Participant

    This machine is only 2 years old.
    Its a Hotpoint WT741 throwing error F-10
    I have looked into some error codes for the other Hotpoint machines and F10 seems to represent pressure system failure or heating circuit failure.

    While on my call, the machine filled to normal level and heated up fine. The heater element good and passed a 1000v insulation test.
    Any ideas please?
    Thanks,
    Robert.

    March 6, 2010 at 2:38 pm #314140
    Phidom
    Participant

    Re: New Hotpoint WT741 Error F-10

    Check if it is filling up quick enough on rinse. I had a similar Indesit machine this week that was giving an H2O error. I found it filled correctly for the first few seconds on a wash then went down to a trickle. On rinse it filled at a trickle from the start until eventually the error came on. I’ve ordered a new valve but won’t know if that’s the answer until it arrives.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.