hoover hnf6167-80 (0001) board issues

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover hnf6167-80 (0001) board issues

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 15, 2010 at 7:22 pm #53254
    gandh1
    Participant

    went out to this one today, no motor action, motor appears to check out ok, but board has popped on the main module,

    its the area where on the reverse “wire J8” and a large black component “503 180” is located, or the 6th track connection from the LHS of the bank of tracks furthest away from the computer-type style loom connector. i.e the bank of tracks that are all fat, and spaced apart rather than half fat and spaced apart and half thin and close togethter…
    *hopes this make sense* :rolls:

    basically wondered if this part of hte board relates to the motor at all because customer said upon visit theyve already had motor replaced before under warranty (and im wondering the board too)

    also have their been any modified boards or updates since this machine was released as motor failures appear to be a common fault for this model on the tinternet review sites…

    March 15, 2010 at 8:33 pm #315109
    BobHope
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    hi gandh1,

    pm me an email address and i will send you some info. 😉

    Bob.

    March 15, 2010 at 9:00 pm #315110
    BobHope
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    you have mail.

    Bob.

    March 15, 2010 at 9:34 pm #315111
    gandh1
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    cheers bob,

    its typical ive got the board that they dont show the reverse of.

    mocked htis up, cant seem to find any reference to what the component actually does tho?

    March 17, 2010 at 12:10 am #315112
    leavemetogetonwithit
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    That thing in the red circle is almost certainly a relay. I think they have 24 volt coils on those boards as opposed to the more common 12v used on most boards. Could very well relate to motor.
    Have you read common PCB repairs sticky thread at head of this forum?
    Mike.

    March 21, 2010 at 11:05 pm #315113
    gandh1
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    yep and im keen to experiment but electronics wasnt my strongest subject at college :rolling:

    but yeh if that one applies to the motor then im not gonna go any further as there is obviously an unresolved issue with this model, that hoover will never bother to rectify on the parts side of things

    March 21, 2010 at 11:14 pm #315114
    leavemetogetonwithit
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    Very wise, especially if it bears the name “Nextra” 👿
    Mike.

    March 21, 2010 at 11:26 pm #315115
    gandh1
    Participant

    Re: hoover hnf6167-80 (0001) board issues

    oh well at least with all that concrete in it it has about 7 quids worth of scrap value 😀

    such a shame tho as the drum is a1 so if anyone needs one speak now or fether hold thy peace…

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.