Indesit IS70C. Installing new jockey pulley.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit IS70C. Installing new jockey pulley.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 22, 2010 at 10:32 pm #53452
    leavemetogetonwithit
    Participant

    Just went to this today. No drum rotation. Took off top and found belt was still on. Took off side panel and found jockey pulley was kn@ckered, belt had slipped off it and was not being driven.
    Question is, is it possible to install new pulley, which comes with bolt-on-to-motor bracket, without removing drum etc.? Doesn’t look like there’s a lot of room in there.
    Mike.

    March 22, 2010 at 10:54 pm #316066
    deltra
    Participant

    Re: Indesit IS70C. Installing new jockey pulley.

    yes you can 😀 take off side panel,then release plastic cover that is over the fan, then release plastic fan(pliers to release spring clip)now you have pleny access to jockey wheel. 8) one of the easier jobs on an indesit 😈

    March 22, 2010 at 11:02 pm #316067
    leavemetogetonwithit
    Participant

    Re: Indesit IS70C. Installing new jockey pulley.

    Ah, I see. Thankyou.
    Mike.

    April 1, 2010 at 12:37 am #316068
    leavemetogetonwithit
    Participant

    Re: Indesit IS70C. Installing new jockey pulley.

    Did this yesterday. Your method worked a treat. Thanks again for that.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.