Indesit WIA111 stuck on cycle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit WIA111 stuck on cycle

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 26, 2010 at 7:02 pm #53570
    Furhan
    Participant

    Hi,
    I have an Indesit WIA111 in the workshop, I started it on a cycle, it took the water in and started to go around, then I pressed cancel, it stopped. I then tried to pump out the water so I put it on the pump program and pressed start, it carried on with the previous program. I moved it to off and press cancel, then tried again and it carried on again.

    Is this a board faulty? I know the pump works as before I tried the cycle I tested the spin and pump options.

    Thanks

    March 26, 2010 at 7:23 pm #316486
    HotDog
    Participant

    Re: Indesit WIA111 stuck on cycle

    if you cant cancel prog its board fault it will complete the last prog if left

    March 26, 2010 at 9:43 pm #316487
    Tony_EMW
    Participant

    Re: Indesit WIA111 stuck on cycle

    Faulty module – in stock at £44.90+vat inc post & ready programmed. http://www.emwelec.co.uk

    March 27, 2010 at 12:01 am #316488
    Micky 32
    Participant

    I came across this the other day with a HVL 200. You could change the program if you un plugged the machine for a few minutes and try again.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.