CPCA240FSK temp probe

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › CPCA240FSK temp probe

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 30, 2010 at 3:14 pm #53666
    yorkshireracer
    Participant

    I’ve fitted a new pcb to this machine. But still intermitently freezes the fridge. Presuming a new temp probe needed. I know the part is available but have heard the repair is a pain (digging into cabinet). Anybody any tips or just right it off???

    March 30, 2010 at 3:20 pm #316783
    Tubs
    Participant

    Re: CPCA240FSK temp probe

    Have to say, its not too bad once you know were sensor is buried, approx 100mm down and about 50mm in from top left corner, Dont bother threading loom through, youll be there all day. Cut off duff sensor, solder and cover wires with heat shrink.

    Steve

    March 31, 2010 at 5:34 pm #316784
    loopey
    Participant

    Re: CPCA240FSK temp probe

    Find out the indicated position, on the
    outer back wall of the appliance (Ref. X
    in Picture 11). This is the exact centre
    of the window, to be opened next.
    Dimension H (measured from the top
    edge of cabinet): 168 mm.
    Dimension L (measured from the left
    side edge of cabinet): 172 mm.

    gimme a bell lol with yer email addy will send you pdf walk through its dead easy lol

    April 22, 2010 at 11:26 am #316785
    yorkshireracer
    Participant

    Re: CPCA240FSK temp probe

    I’ve measured the spot mentioned, but no probe. Any ideas??

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.