Connector on 481236158434 Dishwasher Motor

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Connector on 481236158434 Dishwasher Motor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 8, 2010 at 6:15 pm #53857
    spectra
    Participant

    Hello
    I have just purchased the above motor/pump to replace the “Big Askoll” pump that failed in my Firenze DW930/1 dishwasher from yourselves – Speedy service, thanks.

    As recommended….
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159

    Before I connect the pump I want to confirm the wiring, as the old pump has a 2way connector on it and the new a 3way connector. The 2way connector is keyed and only fits one way around in the 3way connecter on the new pump, but I want to be sure that this is ok before continuing.

    Or is there any way to confirm the wiring by using a DVM?

    Thanks
    Martyn

    April 8, 2010 at 8:32 pm #317500
    aqualectric
    Participant

    Re: Connector on 481236158434 Dishwasher Motor

    The motor plug is keyed so you can’t really make a mistake on this. For reference, when fitted, the plug wires will be at the bottom. 😉 Make sure you secure the motor mounting plate to the 2 holes in the back panel – lift the motor up so the 2 tabs fit in their respective slots and fix the plate to the machine using self tapping screws. (Hint:- you can pinch the 2 screws from the old pump’s coil cover – they are a perfect fit).

    Hope that helps,

    A.

    April 8, 2010 at 9:15 pm #317501
    spectra
    Participant

    Re: Connector on 481236158434 Dishwasher Motor

    Thanks for the quick reply. I’ll connect up tomoroow and probably loose more skin in the process due to the sharp edges of the metalwork!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.