servis m 3015 a module blown

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › servis m 3015 a module blown

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 9, 2010 at 10:13 am #53869
    slyp98
    Participant

    hi guys i have the above wash m/c with a burnt out electronic control module owner tells me it was tripping the rcd before it stopped working does anyone have any experience of replacing a module and all being ok afterwards its just that the module is a bit expensive over here , i have tried whitegoods spare parts but none is listed , thanks a bunch

    April 9, 2010 at 11:27 am #317541
    Phidom
    Participant

    Re: servis m 3015 a module blown

    There is usually another fault to cause the module to fail e.g. motor or heater failure. I would trace wires from the burnt section of the board to the likely culprit. A megger test would be useful for insulation tests between motor brush terminals and motor case, heater terminals and heater case etc.

    April 9, 2010 at 12:52 pm #317542
    slyp98
    Participant

    Re: servis m 3015 a module blown

    cheers fidom will do

    April 24, 2010 at 3:09 pm #317543
    slyp98
    Participant

    Re: servis m 3015 a module blown

    couldnt find anything wrong with motor or pump , she decided to splash out on a new machine thanks phidom

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.