Bearing (motor) for Electrolux Z4646

Home › Forums › Public Support Forums › Help And Support › Vacuum Cleaner Help Forum › Bearing (motor) for Electrolux Z4646

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 14, 2010 at 4:46 pm #53972
    colint
    Participant

    Hi

    The (front?) bearing on the motor axle has seized. Probably not worth the hassle of repairing, but is it possible to get a new bearing (or motor)?

    By ‘front’, I mean the bearing just underneath the aluminium fan. Looks like a pretty bog-standard bearing, to my unknowledgeable eyes 🙂

    Electrolux
    Model Z4646
    Type A1

    Thanks!

    Colin

    April 14, 2010 at 5:32 pm #317907
    Martin
    Participant

    Re: Bearing (motor) for Electrolux Z4646

    The bearing size (spec) is stamped on the outer bearing shield or on the outer part of the race. 108Z maybe or some similar number and available in most local bearing suppliers outlets. 😉

    April 15, 2010 at 10:08 am #317908
    colint
    Participant

    Re: Bearing (motor) for Electrolux Z4646

    Martin wrote:The bearing size (spec) is stamped on the outer bearing shield or on the outer part of the race. 108Z maybe or some similar number and available in most local bearing suppliers outlets. 😉

    Great, thanks! I’ll have a look…

    November 18, 2010 at 10:00 pm #317909
    admin
    Keymaster

    Thanks so much. This is very helpful. I did not know that the bearing just underneath the aluminium fan. Once I found this, I was able to get the repair fairly quick. I wish that they would make these easier to repair.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.