Howdens Lamona/Candy? washer intermittent failure to start

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Howdens Lamona/Candy? washer intermittent failure to start

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 15, 2010 at 1:22 pm #53997
    cbr1200xx
    Participant

    Lamona Integrated Washing Machine 1200rpm. This has a start button (three other control buttons) and two control (Settings) dials.
    Recently it has developed an intermittent fault where it wont start when the program is set and the start button pressed. It fails to engage door lock or start the cycle (normally little red LED’s light to indicate success door lock/start).
    Is this a faulty board (Candy 41040895 or similar?) or faulty door closed switch/sensor? or even something else?

    Any help much appreciated

    Thanks

    Paul

    April 27, 2010 at 11:37 pm #317982
    paul161201
    Participant

    Re: Howdens Lamona/Candy? washer intermittent failure to sta

    TrY the door lock

    April 28, 2010 at 7:27 pm #317983
    cbr1200xx
    Participant

    Re: Howdens Lamona/Candy? washer intermittent failure to sta

    Thanks for the feed back I examined the door lock as that was one my thoughts, but during the process of trying to find the culprit I discovered that the Start button works for some of the programs but not all.
    Rotary control dial with multiple different functions. NOt sure if ROtary control or main board, more inclined to think rotary control. Will have a look at this in the next day or two
    Thanks again for the feedback

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.