wf741 fill level too low

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wf741 fill level too low

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 17, 2010 at 3:14 pm #54030
    delta01
    Participant

    cust complained not washing properly, water level does seem very low approx 25cm above drum , i tried anothr presue switch but its just the same can anyone help please

    April 17, 2010 at 4:02 pm #318115
    iadom
    Moderator

    Re: wf741 fill level too low

    Thats about right with no clothes in.

    Poor wash is usually down to over/under dosing, cheapo detergents, overloading or possibly partially blocked sump.

    Generally, if its tumbling and heating then its not the machine.

    April 18, 2010 at 8:20 am #318116
    delta01
    Participant

    Re: wf741 fill level too low

    apparently customer complained that the clothes were dry in the middle
    it seems like its not topping up as the clothes absorb water, anyhow i brought it in and will soak test it in work shop (no pun intended )
    i wondered if she may have overloaded it

    thanks for your reply

    April 18, 2010 at 7:01 pm #318117
    leavemetogetonwithit
    Participant

    Re: wf741 fill level too low

    25cm is 10″. Did you mean 25mm?
    Mike.

    April 19, 2010 at 6:08 am #318118
    Flyman
    Participant

    Re: wf741 fill level too low

    “Clothes dry in the middle” is the normal complaint if the customer is using the wool wash program for normal washing. It is one of the shortest washes but is not suitable for a normal load due to its was action.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.