zanussi zwf12070w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zwf12070w

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 21, 2010 at 3:25 pm #54109
    sandysuds
    Participant

    Hi Guys
    Can anyone help, a zanussi zwf12070w drain pump runs on all cycles nothing else
    Sandy

    April 21, 2010 at 6:34 pm #318432
    A1engineer
    Participant

    Re: zanussi zwf12070w

    pressure switch fault, it sometimes just needs the board reset, i think the fault sticks till you do a reset.

    April 21, 2010 at 7:01 pm #318433
    bigchrisoioi
    Participant

    Re: zanussi zwf12070w

    sorry , u need to post a diagnostic code…the zanuzzi machine is good for these…give me the code, i can help…no problem, cheers chris

    April 21, 2010 at 9:43 pm #318434
    Seamy
    Participant

    Re: zanussi zwf12070w

    If you can go into service mode & get it to fill with water, then empty, it should reset. If not its possibly a board faulty.

    June 30, 2010 at 9:17 am #318435
    Tom
    Participant

    Re: zanussi zwf12070w

    Hi
    ❓ I’ve got one of theses Zanussi zwf12070w where drain pump runs on all cycles nothing else. The problem has happened twice several weeks apart & seemed to happen at the end of the wash stage.
    The first time it just came ok without doing anything in particular.
    I’ve tried the diagnostic procedure and got the start/pause button flashing with — one green flash followed by 3 red flashes. this sequence then repeats indefinitely. I’ve searched the forums without success for how to interpret this indication.
    Any help will be much appreciated as I’ve sold a number of these machines.
    Thankyou in advance.
    p.s.
    I’ve replaced the pressure switch & am waiting to see how it goes.
    On a quick test every thing seems normal
    Apologies for longwinded post.
    tom

    June 30, 2010 at 9:44 am #318436
    sandysuds
    Participant

    Re: zanussi zwf12070w

    Hi tom
    It was the pressure switch on mine and it cured it

    June 30, 2010 at 3:44 pm #318437
    Tom
    Participant

    Re: zanussi zwf12070w

    Hello sandysuds.
    Many things for reply.
    You’ve given me increased grounds for believing its cured.
    All the best
    tom

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.