zanussi zwf12070w

[sandysuds]

Hi Guys
Can anyone help, a zanussi zwf12070w drain pump runs on all cycles nothing else
Sandy

[A1engineer]

Re: zanussi zwf12070w

pressure switch fault, it sometimes just needs the board reset, i think the fault sticks till you do a reset.

[bigchrisoioi]

Re: zanussi zwf12070w

sorry , u need to post a diagnostic code…the zanuzzi machine is good for these…give me the code, i can help…no problem, cheers chris

[Seamy]

Re: zanussi zwf12070w

If you can go into service mode & get it to fill with water, then empty, it should reset. If not its possibly a board faulty.

[Tom]

Re: zanussi zwf12070w

Hi
❓ I’ve got one of theses Zanussi zwf12070w where drain pump runs on all cycles nothing else. The problem has happened twice several weeks apart & seemed to happen at the end of the wash stage.
The first time it just came ok without doing anything in particular.
I’ve tried the diagnostic procedure and got the start/pause button flashing with — one green flash followed by 3 red flashes. this sequence then repeats indefinitely. I’ve searched the forums without success for how to interpret this indication.
Any help will be much appreciated as I’ve sold a number of these machines.
Thankyou in advance.
p.s.
I’ve replaced the pressure switch & am waiting to see how it goes.
On a quick test every thing seems normal
Apologies for longwinded post.
tom

[sandysuds]

Re: zanussi zwf12070w

Hi tom
It was the pressure switch on mine and it cured it

[Tom]

Re: zanussi zwf12070w

Hello sandysuds.
Many things for reply.
You’ve given me increased grounds for believing its cured.
All the best
tom

[Author]

Posts