Bosch WAA24171GB/01 rinse LED flashing?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WAA24171GB/01 rinse LED flashing?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 18, 2010 at 11:46 am #54663
    Rograbbit
    Participant

    Hi folks. Just ata Bosch WAA24171GB/01 FD 8805 02190. Rinse LED flashing on switch on. Changed brushes completely worn. Still got LED flashing, do I need to go through cancel procedure? Tried holding buttons and going to six o clock then seven oclock. May not be the sequence for this model.
    Thanks in advance.

    May 18, 2010 at 4:15 pm #320526
    nomadPaul
    Participant

    Try holding in the start button for 3 secs and turning the selector switch one click Anti-clockwise ( i.e 12 o’clock to 11 o’clock ) This is the way to enter the test programme.

    ….and the Rinse LED flashing is indeed a fault in the drive circuit so i think you’ve got the right component. Only hope the motor’s not goosed .

    May 18, 2010 at 4:55 pm #320527
    Rograbbit
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    Thank you again Nomad Paul, what would we do without you.
    I tested the motor carefully so hopefully I can now get the customer washing again.
    Thank you. 😀

    May 19, 2010 at 10:52 am #320528
    Rograbbit
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    Update. Everything now working fine. Another happy customer.
    Thanks again. 😀

    May 19, 2010 at 10:55 pm #320529
    Penguin45
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    The problem was………?

    Chris.

    May 20, 2010 at 5:07 pm #320530
    Rograbbit
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    Hi Chris. It was only the motor brushes, but cancelling the registered fault was where help was needed and received from Nomad Paul.
    So another one to make a note of folks. 🙂

    May 20, 2010 at 5:33 pm #320531
    superfix
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    😕 You don’t have to cancel the fault, it will work once brushes are fitted 😕

    May 20, 2010 at 6:44 pm #320532
    Rograbbit
    Participant

    Re: Bosch WAA24171GB/01 rinse LED flashing?

    This one didn’t I can assure you. Had to put in to test mode and switch off and on again and then was fine. 😕

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.