Bosch sgs43E02gb/35 – UK Whitegoods

This topic has 3 replies, 2 voices, and was last updated 15 years, 10 months ago by Tom.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
May 21, 2010 at 9:53 pm #54751

Tom
Participant

I’me in need of info re the wires on to the motor for the divertor valve.
There was a water leak (maybe at the salt container gasket & nut) causing a burn up of this motor and its connector block.
The wire colours are: 2 white; 1 grey; 1 white. These 4 wires were held in a plug/block connected to 3 terminals on the motor. I cannot figure for sure which goes where due to the damage.
The FD No is 8304 980377

I have looked at a number of other bosch dishwashers but none have the same coloured wires and there does’nt seem to be any common arrangement for the wires.

It’s going to be someone with access to Bosch wiring details I think or maybe someone is working on exactly the same model right now.

thanks in advance to anyone who can help.
tom

May 23, 2010 at 8:27 pm #320866

keithwilliams
Participant

Re: Bosch sgs43E02gb/35

i once asked bosch for a service manual for my condeser dryer. a free copy turned up a few days later. it might be worth asking nicely.

May 23, 2010 at 10:41 pm #320867

Tom
Participant

Re: Bosch sgs43E02gb/35

Hi keithwilliams.
Many hanks for your posting and suggestion. I will speak to Bosch spares tomorrow.
I do order spares from them regularly so nothing to loose by asking. Failing that I’m thinking of a new wiring harness.
tom

May 24, 2010 at 2:10 pm #320868

keithwilliams
Participant

Re: Bosch sgs43E02gb/35

just been to one todasy.
when viewd from below the colours were

red to left then both white together in middle then grey on the right. by right that is towards the heater terminals on the box.
i’ve taken a photo if you need it.
keith
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.