Smeg A1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg A1

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 7, 2010 at 6:59 pm #55075
    rocker
    Participant

    customer tells me the oven shuts down, but will come back on again, when cooled, I know on the electrolux / aeg oven it is always the cooling fan stat, is it the same on these..can anyone advise.
    Thanks John

    June 7, 2010 at 7:13 pm #321859
    Oldtog
    Participant

    Re: Smeg A1

    Rocker, I think you will find it is the safety stat at the rear, it cuts out when the temp is too high and cuts back again when cooled down. Its a typical bimetal situation. If memory serves me well I think it is fitted via the Neutral on the r/h/s as you face it from the rear.

    I hope this helps.

    OT

    June 7, 2010 at 7:45 pm #321860
    rocker
    Participant

    Re: Smeg A1

    Thanks O T will check that out. cheers John

    June 7, 2010 at 7:55 pm #321861
    rocker
    Participant

    Re: Smeg A1

    There are two stats on the rear RHS, drawing not showing which one I need, any one know please. John

    June 7, 2010 at 9:38 pm #321862
    Oldtog
    Participant

    Re: Smeg A1

    One is o/c tangtegial fan, you can trace lead from stat to fan to check the other is c/c and may have one white in and one whit out, it also has a red dot on the top.

    OT

    June 7, 2010 at 9:53 pm #321863
    rocker
    Participant

    Re: Smeg A1

    Thanks yet again OT. John

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.