siemens se24m851gb/01 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens se24m851gb/01 dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 9, 2010 at 5:00 pm #55135
    suedehead1
    Participant

    hi,
    the dishwasher is overfilling it doesnt flood as a plastic bobbin float in the left panel cuts the pump in then the level drops and it fills up again then pumps.
    there is no water in the base the polystyrene float is not activated.

    i have checked the clear plastic tube at the front lhs it is clean.

    i cannot work out what gives the machine the water level it has a flow meter but no pressure switch.

    any ideas welcome.

    June 9, 2010 at 5:09 pm #322028
    timdowning
    Participant

    Re: siemens se24m851gb/01 dishwasher

    The signal from the flow meter tells the module to stop the filling sequence.

    Change the flow meter, that should sort it.

    June 9, 2010 at 5:34 pm #322029
    suedehead1
    Participant

    Re: siemens se24m851gb/01 dishwasher

    thank Tim i will give it a try.

    June 15, 2010 at 7:34 pm #322030
    suedehead1
    Participant

    Re: siemens se24m851gb/01 dishwasher

    changed the flow meter it worked,
    thanks!!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.