Smeg DWi66 Dishwasher-no fill

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg DWi66 Dishwasher-no fill

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 14, 2004 at 7:54 pm #5517
    Ray9500
    Participant

    Has anyone had problems with these not filling?

    I have one that originally had E2 flashing on the display, this was caused by nusiance tripping of the float/overflow switch.
    I then replaced the metering tank for one of the new improved ones, i fitted the full kit, nothing left out, wired the new pressure switch and float switch correctly etc.
    …but since then it refuses to fill 😯

    No broken wires, all valves ok,no blockages, no open circuits, new pressure switch and float switch ok….HELP!

    Only thing left seems to be the control PCB..bit strange to play up after fitting a metering tank.

    Any help appreciated!

    Regards
    Ray

    May 14, 2004 at 8:36 pm #111678
    Dave_Conway
    Participant

    Re: Smeg DWi66 Dishwasher-no fill

    Ray.

    I’ll have a look in the morning at Smeg’s tech disk, see if i can see anything there.

    Dave.

    May 15, 2004 at 9:53 am #111679
    Dave_Conway
    Participant

    Re: Smeg DWi66 Dishwasher-no fill

    Nothing obvious, this is just the fairly standard Smeg integrated dishwasher.

    I’ve sent you a pdf file that may be useful 😉

    Dave.

    May 15, 2004 at 4:37 pm #111680
    Ray9500
    Participant

    Re: Smeg DWi66 Dishwasher-no fill

    Thanks Dave 😀

    I keep saying i’ll steer clear of these…and still keep doing them!
    Just keep telling myself ‘its just a dishwasher’ 😉

    Regards
    Ray

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.