De Dietrich Induction Hob

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › De Dietrich Induction Hob

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 11, 2010 at 2:31 pm #55173
    blokes
    Participant

    Hi all, Ive been to a De Dietrich Induction Hob DTI309 today. Never worked on one before.
    If you place a kettle on one of the rings and press the boost button, all I get is bo flashing on the display.

    Anyone got any experience on these beasts !!!

    June 11, 2010 at 2:38 pm #322166
    timdowning
    Participant

    Re: De Dietrich Induction Hob

    Now I know absolutely zilch about cookers & hobs, but don’t you need a certain type of base on the kettle, saucepan etc to get the hob to work?

    Does it work with saucepans?

    Tell me to get my coat if you want!

    June 11, 2010 at 2:44 pm #322167
    blokes
    Participant

    Re: De Dietrich Induction Hob

    Well I assume they have the right sort of kettle, as it works on the other four rings of the hob!!!!!!!!!!!

    June 11, 2010 at 4:23 pm #322168
    Jazzmeister
    Participant

    Re: De Dietrich Induction Hob

    You more than likely have a problem with the pan sensor or main board then!

    Jazz

    June 12, 2010 at 9:11 am #322169
    funkyboogy
    Participant

    Re: De Dietrich Induction Hob

    if you get a flashing display you have more than lightly used a wrong pan.. pans need to be non ferrious

    something to do with induction/emf fields .. pan completes the field ..

    but if pan doesnt have good magnetic properties it wont return/complete field..

    best way to check is stick a magnet to pan ..

    wow i fell like steven hawkins now .. quite a complex issue ..

    not used to replying to complex problems .. hope it makes sense ..

    and there is a possibility pan sensor faulty..

    ally

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.