Hotpoint (Indesit )DI450 Module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint (Indesit )DI450 Module

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 15, 2010 at 4:17 pm #55255
    Geoff1312
    Participant

    Hi Was wondering if anyone could help me with the part number for the module please?

    The info on the sticker on module is:
    H&T-BIT100.1EV03-Q6 215009768.01
    W5410F02 075011311

    Have looked on connect but just seem to being going round in circles.
    Many thanks
    Geoff

    June 15, 2010 at 4:57 pm #322434
    iadom
    Moderator

    Re: Hotpoint DI450 Module

    If it is a DI450UK then there appears to be just one PCB, part number C00143214.

    If it is a DI450UKC then there are two different ones depending on serial number of machine.

    NB. DI is an Indesit model number, not Hotpoint. 😕

    June 16, 2010 at 8:47 am #322435
    Geoff1312
    Participant

    Re: Hotpoint DI450 Module

    Hi Iadom,

    Thanks for that. It’s not C00143214 as I had one of these and tried it. Is it possible you can give me part numbers for the other two? I will go back and check serial number.

    Thanks
    Geoff

    June 16, 2010 at 9:50 am #322436
    iadom
    Moderator

    Re: Hotpoint DI450 Module

    Is it an Indesit machine?

    If it is a DI450UKC then it a Chinese made heap.

    Before serial number 71105.9999 its a C00255860
    After serial number 71106.0000 its C00259736

    Both a bit expensive for such basic, small PCB’s

    Jim.

    June 16, 2010 at 10:16 am #322437
    Geoff1312
    Participant

    Re: Hotpoint DI450 Module

    Hi,

    Yes it is indesit, sorry my mistake. Just one more question. When i put C00255860 in connections it tells me no longer available use C00259736, will this module work for all models regardless of serial number?

    Thanks for all your help
    Geoff

    June 16, 2010 at 3:15 pm #322438
    iadom
    Moderator

    Re: Hotpoint DI450 Module

    Not sure but according to the limited info on Partfinder the ‘high pressure sensor’ has been removed on the later Wuxi made dishwashers. That seems to be the only reason for the change in PCB.

    Partfinder is updated online every week or so and there is no mention of it being superceded on that yet.

    C00259736 is still listed as available at Masterpart.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.