hotpoint wf860

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wf860

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 30, 2010 at 10:41 am #55545
    DDSDDS
    Participant

    does any body know if there is a functional test programme for this machine similar to the one on the wma60 series
    also is there any way of finding out what software is currently on a pcb as i have a couple of spare working boards but i dont know if they are off the wf860 or the wt860

    thanks for any help

    danny

    June 30, 2010 at 12:31 pm #324268
    electrofix
    Moderator

    Re: hotpoint wf860

    i would talk to EMW
    they programme the boards so if you other board only needs a software change they will do it thay can also test you existing board

    Dave

    June 30, 2010 at 2:10 pm #324269
    DDSDDS
    Participant

    Re: hotpoint wf860

    i have the smart card and reader so programing is not a problem and i do deal with emw when i am stuck its just i have a few good ones and wondered if there was a way of knowing what software was currently on it
    i can tell what the spin speed is using my rag but as for what drum / motor or hot and cold etc no clue so currently i am fitting the boards and reprograming them even though they may be the same software
    but the chances of having the right board with the right software i suppose is extremely low

    June 30, 2010 at 8:28 pm #324270
    helo_75
    Participant

    the softare variant tends to be written on the label on the outer casing!

    July 1, 2010 at 9:05 am #324271
    DDSDDS
    Participant

    Re: hotpoint wf860

    would that be the 215007969.03 …..micro 2.74 number on the relay sticker?
    or the barcode sticker 3796503294loh7 ?

    July 1, 2010 at 11:20 am #324272
    DDSDDS
    Participant

    Re: hotpoint wf860

    sorry helo forgot to ask do you know if there is a test program of some description for these models?

    July 1, 2010 at 5:42 pm #324273
    helo_75
    Participant

    unfortunately not

    the number on the pcb is

    (21)country of manufacture (50079) commercial code .these are on the label on the machine

    July 2, 2010 at 2:36 pm #324274
    DDSDDS
    Participant

    Re: hotpoint wf860

    thanks

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.