- This topic has 1 reply, 2 voices, and was last updated 15 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I an unable to remove the wire holding the rubber door seal to the front of the machine. The clip holding it in place looks like a small piece of ribbed metal about 3 inches in length . How do you remove this clip?
Its not the spring type or the teeth type.Re: Door seal on a WMA 54
:con: Manual only shows the ‘zipper’ type clamp, not seen any other kind on late WMA’s. ❓
What do you mean by the toothed type clip, the early wire type with a two piece plastic clip at the top ?
The zipper type clamp has a small metal plate located next to the door hinge, you have to use a small terminal screwdriver to prise one of the hooked ends of the wire out. Refit using long nosed pliers.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.