Diplomat ADP8322 spilling over! Help!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP8322 spilling over! Help!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 14, 2010 at 9:52 am #55830
    mcalvert11
    Participant

    Hi, I have an issue with my Diplomat ADP8322 dishwasher whereby the water isn’t draining from the bottom and I get a constant beeping mid cycle and 4 flashes from the indicator switch.

    From reviewing the various posts on the site I believe that it is probably a blocked or faulty Diaphragm Switch. I removed the dishwasher last night to get access to the underneath so that I can remove it but as soon as I start tipping it to one side, water starts pouring out onto my feet! I turned it on again to see if the pump can get rid of the excess water and it runs but there always seems to be some water at the bottom which it can’t get rid of.

    Is there some sort of drainage plug which I need to pull to get rid of the water at the bottom? If not how can I tip it over??

    Thanks,

    Mark

    July 23, 2010 at 11:48 pm #325279
    Penguin45
    Participant

    Re: Diplomat ADP8322 spilling over! Help!

    Four flashes is the no drain error. Commom sense would suggest that bailing out the machine before tipping it would be a good plan. The drain pump is a twist-fit; accessible through the front lower panel – no need to tip he machone at all.

    Penguin45.

    July 24, 2010 at 10:09 pm #325280
    mcalvert11
    Participant

    Re: Diplomat ADP8322 spilling over! Help!

    Thanks for that but how do I bail the water out? There is no water inside the actual machine. It’s coming from under the machine and I cant see where to get access to bail the water out…? Any ideas?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.