hotpoint wf540 and wf541 ntc fault code.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint wf540 and wf541 ntc fault code.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 3, 2010 at 5:05 pm #56266
    keithwilliams
    Participant

    hello everyone. i’ve now had two calls with the same error code within 24hrs. i’ve been to the first one which was light 3 + 4 flashing (ntc according to fault code book). i plugged in a brand new one and the fault was still showing. i removed original one and took readings which were exactly same as new one 25K. the cancel and on/off button would not respond. i’ve referred first customer to hotpoint assuming module fault.

    can anybody tell me if there is something unrelated which could cause an NTC fault code? or am i right to blame module.

    thanks
    keith

    August 3, 2010 at 5:10 pm #326741
    iadom
    Moderator

    Re: hotpoint wf540 and wf541 ntc fault code.

    I have found that the NTC itself is rarely faulty. Its usally bad connections or the c****y PCB. 😥

    August 3, 2010 at 5:59 pm #326742
    allan73
    Participant

    Re: hotpoint wf540 and wf541 ntc fault code.

    Would it not have been worth ordering a board from EMW ?
    About £45 + VAT I think.

    August 3, 2010 at 9:13 pm #326743
    keithwilliams
    Participant

    Re: hotpoint wf540 and wf541 ntc fault code.

    checked connections for continuity so its probably the board. i’d rather not get involved if it is, cos buy the time i buy in a module and charge for fitting it they’d be better off calling hotpoint. its brownie points for me for being honest, and i’ve plenty on so i don’t need the hassle.
    thanks for the replies it is appreciated.
    k

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.