HT WMA62 door lock will not lock

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › HT WMA62 door lock will not lock

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 4, 2010 at 6:05 pm #56309
    alro
    Participant

    Hi gents have a wma 62 lock not working or machine wont start need help on this one found poor insulation on motor 79,9 m ohms tried new motor but machine still not starting & new door lock
    cheers alro

    August 4, 2010 at 6:38 pm #326882
    timdowning
    Participant

    Re: HT WMA62 door lock will not lock

    Definitely the board.

    Thats assuming you have used your terminal screwdriver to slide across the door lock. This eliminates the door handle / hook / spring from being your culprit. They can sometimes look & feel ok!

    79.9 Mohms on the motor. Thats ok.

    (You have checked child lock isn’t activated?)

    August 6, 2010 at 10:21 am #326883
    alro
    Participant

    Re: HT WMA62 door lock will not lock

    thanks for reply i assumeb it could be but the chlid lock is not on can select any prog but the key hole flashes when start button pressed and bleebs 5 times no fault code apears or is this 5 bleeps a code
    any more checks i can do would help me
    cheers alro

    August 6, 2010 at 10:41 am #326884
    Martin
    Participant

    Re: HT WMA62 door lock will not lock

    The boards gone belly up then either caused by the motor or more likely the interlock. Check the board to see the circuit that’s to blame for its demise.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.