- This topic has 3 replies, 2 voices, and was last updated 21 years, 9 months ago by
.
-
Posts
-
Re: Zanussi dishwasher DE6965 AL7 fault code
According to Zanussi it means that there is no water circulation, which could be one of a few different things causing it.
Check the filter for blockages, apart from that you will more than likely need an enginner to check the relevent components for you.
Hope that helps a bit anyway
Dave.
Re: Zanussi dishwasher DE6965 AL7 fault code
Dave_Conway wrote:According to Zanussi it means that there is no water circulation, which could be one of a few different things causing it.
Check the filter for blockages, apart from that you will more than likely need an enginner to check the relevent components for you.
Hope that helps a bit anyway
Dave.
Is that the water inlet filter or the internal debris filters, is there anything else I can look at / check before calling out an engineer (the machine is out and part in bits anyway)
Re: Zanussi dishwasher DE6965 AL7 fault code
The internal filter may need cleaning out.
The fault basically means that water is in the dishwasher but it’s not being circulated by the main pump, which could be pump/motor failure, or one of the related start/control devices that attach to it. It could also mean something as simple as a blockage.
If you are tempted to delve around inside the workings, please ensure the diswasher is disconnected from the power supply.
Dave.
- You must be logged in to reply to this topic.