- This topic has 7 replies, 4 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Hi Guys,
Having a problem with these cookers, had a few where the thermal cutout from main oven has closed circuit, but having a problem in identifying why? the oven seams toregulate its temptrature ok and have a customer where this has happened for second time, they where using the oven and two rings when it’s has gone off again ‘assuming before I look at this it is same thermal cutout’, Have had a few of these ovens and the DC5422 with same fault.
Can anyone suggest anything to resolve, only other thing is oven thermastat maybe?
thanks in advance
Re: Beko D531 Thermal Cutout problem
Had quite a few of those TOC’s go down, think they must be c**p !
Re: Beko D531 Thermal Cutout problem
yeah finding same thing, but try and explain to a customer it’s a faulty component 😯
gotta be a solution, going to change oven thermostat as its the oven TOC that is closed circuit each time, either that or a useless batch of TOCs!?
Re: Beko D531 Thermal Cutout problem
OK hopefully have a solution to this, just got off phone with tech support @Beko and they confirmed they had a faulty batch of these, so looks as if I replaced with another piece of cr*p 😆
They have however given me a part number that should resolve this issue, the part number is: 4410101001 however it isn’t in stock 😡
anyone having this problem, it would maybe be worth getting this part to replace!
Re: Beko D531 Thermal Cutout problem
210110544 is a thermal cut-out thats been fitted to a lot of Beko cookers, its the button type that takes 2 spade cable connections as opposed to the thermal fuse crimped wired type.
Re: Beko D531 Thermal Cutout problem
It’s the button ones Ive had problems with, have they been changed ?
Re: Beko D531 Thermal Cutout problem
210110544 is available in the shop on here, try putting the part num’ in to search box.
- You must be logged in to reply to this topic.