Zanussi washing machine ZWF1240W E30 error code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi washing machine ZWF1240W E30 error code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 12, 2010 at 8:43 am #56474
    MARIO
    Participant

    Went to a Zanussi ZWF1240W Prod. code 914517515/00 . Start prog. door locks and pumps then wash light goes out and machine ends program, E30 came up . Error code not listed and to make matters worse it works ok sometimes. Tried new valve as it does not start to fill before it ends prog. but to no avail. Is this timer module fault ?

    August 12, 2010 at 9:24 am #327538
    timdowning
    Participant

    Re: Zanussi washing machine ZWF1240W E30 error code

    E30 is pressure switch related. But do check insulation of motor & heater. Low insulation can cause this error.

    August 12, 2010 at 10:46 pm #327539
    leavemetogetonwithit
    Participant

    Re: Zanussi washing machine ZWF1240W E30 error code

    This might interest you. It’s still going by the way. (Phew.)
    Mike.

    August 14, 2010 at 10:11 am #327540
    MARIO
    Participant

    Re: Zanussi washing machine ZWF1240W E30 error code

    Thanks for your replies .I have called back and checked motor and element again and they seem ok . I removed pressure chamber and cleaned the sump hose and chamber reassembled and it has worked touch wood .Will let you know if it keeps working .

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.