boot rubber

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › boot rubber

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • August 13, 2010 at 2:27 pm #56505
    ELTEL
    Participant

    Hi as any one changed a boot rubber on a BEKO WMA 767S
    washer
    is it a simple job or a strip down
    thanks
    Eltel

    August 13, 2010 at 4:17 pm #327779
    electrofix
    Moderator

    Re: boot rubber

    take the front off the machine same as hotpoints bosch etc

    Dave

    August 13, 2010 at 6:20 pm #327780
    Seamy
    Participant

    Re: boot rubber

    Through the door, 5 min job, fairys liquid on seal when fitting & on pinkies when putting on inner spring !

    August 13, 2010 at 7:44 pm #327781
    ELTEL
    Participant

    Re: boot rubber

    Hi
    Are we talking the same machine the boot rubber is fitted and then it looks like a cast iron weight is fitted on top no way can get boot rubber off of on
    Eltel
    The model is a beko WMA 767S

    August 13, 2010 at 7:50 pm #327782
    Jazzmeister
    Participant

    Re: boot rubber

    to make it easy…remove the front of the appliance then use a torx bit to undo the weight securing bolts….remove the weight then hey presto is an east fit. This will take you in total about 20 mins!

    hope this helps..Jazz!

    August 13, 2010 at 8:42 pm #327783
    iadom
    Moderator

    Re: boot rubber

    I’ll swap you five Beko seals for one Smeg made Whirlpool integrated washer/dryer I did for the first time today, a real arse of a job. 😥

    Jim.

    August 16, 2010 at 8:17 pm #327784
    ELTEL
    Participant

    Re: boot rubber

    Hi Jazzmeister
    Thanks did the job fine took a bit longer only a small kitchen no space to work but job done thanks again
    Eltel

    August 18, 2010 at 3:06 pm #327785
    Jonah
    Participant

    Re: boot rubber

    Even worse than the SMEG is the Siltal made CDA CI592 washer dryer, impossible without removing the tub, I’ve tried before for hours on them and couldn’t change one, have the scars to prove it :eeek:

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.