- This topic has 5 replies, 3 voices, and was last updated 21 years, 9 months ago by
.
-
Posts
-
Hi
went to one of these the other day, came up intermittently with error 3 😮 . I couldnt get it to reproduce the fault.
What could this be?
Cheers.
Re: Hoover Interact AAA140 “Error 3”
Error 3 or E3 as it should be displayed is not draining quickly enough (3 minute time out).
Probably an intermittent pump, or partially blocked waste somewhere ?
Amazing what you find when you look hard enough 😉 New Hoover error codes will be in the “known error code” thread shortly 😀
Dave.
Re: Hoover Interact AAA140 “Error 3”
nah it was all clear, drain ect ect
was there for 2 hours..
thanks anyway!Re: Hoover Interact AAA140 “Error 3”
I would change the pump then, it’s almost certainly a magnetic type and we all know how annoyingly unrealiable/intermitent these are.
Universal askol/plaset should do the trick.
Dave.
Re: Hoover Interact AAA140 “Error 3”
Dave_Conway wrote:I would change the pump then, it’s almost certainly a magnetic type and we all know how annoyingly unrealiable/intermitent these are.
Good advice ! 🙂 As far as I recall these ‘Candy’ machines have 2 pumps 😕 The front one with the filter/strainer attached being the ‘wash’ pump and the rear being the ‘drain’ pump.
I often get ‘have a go’ customers saying they have “checked the filter and its all clear!” without realising there’s another pump behind that’s at fault 😉
Martin
- You must be logged in to reply to this topic.