Zanussi ZWD 16581W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWD 16581W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 26, 2010 at 11:29 am #56804
    johnnyhoz
    Participant

    This machine starts by draining then cuts out, No error codes appear, and the start/pause flashes continuously. The dryer programme works fine. Can’t see any mention in the known error codes.
    Any ideas please

    John

    August 26, 2010 at 12:01 pm #328891
    Martin
    Participant

    Re: Zanussi ZWD 16581W

    Check the usual Johnny, Heater, Inlet Valves, Motor/Brushes and don’t overlook the wash pump too! 😉

    After all that and you can’t find anything wrong then it’s out with the PCB for a visual. 💡

    August 26, 2010 at 1:17 pm #328892
    johnnyhoz
    Participant

    Re: Zanussi ZWD 16581W

    Cheers Martin

    August 26, 2010 at 11:44 pm #328893
    leavemetogetonwithit
    Participant

    Re: Zanussi ZWD 16581W

    Check for insulation resistance below 40 Megohm on dryer element. If it’s not that, try same test on wash element. (See service manual pp. 84 & 86 or thereabouts.) Washer should work OK if you disconnect dryer element.
    Mike.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.