Zanussi ZWF 1430 E90 code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF 1430 E90 code

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 6, 2010 at 5:33 pm #57053
    Dapman
    Participant

    Hi
    Can anyone tell me what error code 90 means on a zanussi zwf 1430. All the facia lights flash also.

    Cheers Dave.

    September 6, 2010 at 5:42 pm #329651
    electrofix
    Moderator

    Re: Zanussi ZWF 1430 E90 code

    all the E90 codes relate to pcb errors e90 is shown on display and you can only see correct code by going into engineering or service mode

    E91 & 92
    Communication error between main PCBdisplay
    board
    (versions not compatible)

    E94 Incorrect configuration of washing cycle

    E95 eprom communication error

    E97 prog selector and cycle config error

    try the following
    disconnect wire leading to display module from main pcb
    turn on machine wait 5 secs and turn off again
    reconnect wire and turn on

    may not work but worth a try

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.