- This topic has 7 replies, 4 voices, and was last updated 15 years, 6 months ago by
.
-
Posts
-
Can anyone help me out on this one, m/c aborts with 1 min in display intermitently. when it does this customer say’s there’s usually water in drum and door is locked.
Allan
Re: Bosh WFK2801GB/01 1min in display
Can anyone help me out on this it’s quite far away so I was hoping to go pre armed with info ❓
I was thinking pump intermittent maybe ❓I believe ‘1 min’ in display is the time out code on these machines.
So It could be pump, heater, inlet valves, motor etc.
hope that helps.
Re: Bosh WFK2801GB/01 1min in display
Fitted a new pump to this last week, pump was definately shot and thought all was well. Now customer complaining still aborts with 1 min in display intermittently but now it’s empty when this happens 😕
Customer also say’s it does this at end of cycle and washing seems to be spun ok.
Any Bosh guys out there who can help me out on this.
Allan.
Re: Bosh WFK2801GB/01 1min in display
Did you megger the heating element? They can make it throw a wobbly at times if its only slightly down to earth.
phil
Re: Bosh WFK2801GB/01 1min in display
Thanks Phil, I’ll go back & check for earth leaks. If I can’t find any low ins is it likely to be a board fault ❓
Re: Bosh WFK2801GB/01 1min in display
It has come up before have a look here:-
http://www.ukwhitegoods.co.uk/modules.p … +wfk2801gb
- You must be logged in to reply to this topic.